Home     Cox Products     Dealers     Shop     News     Product Support     Mower Match     About Cox     Contact  Frequently Asked Questions & Maintenance Tips      Operation Manuals

Look here for answers to questions you may have on your Cox mower, and also any interesting maintenance tips to keep your purchase running smoothly.         My cutter is cutting uneven and is too low in the front?     Check and adjust tyre pressures, especially the front tyres. Check tyre diameters, one maybe worn or a different brand replacement used. The cutter is usually low on the side of the smallest diameter front tyre. Some times swapping the front wheels will correct the problem. If this is not possible, remove the cutter assembly connecting linkage and clamp in a vice and twist linkage to suit. On late model machines there is a slide adjuster on the front axle to cutter linkage for left to right adjustment. With engine off and tyre pressures checked, engage the cutter and adjust the rear lifting link nut to level the deck front to rear. The height control handle will raise one or two notches for full height.     My cutter is cutting uneven and is too low in the front?     My mower does not cut grass cleanly?     When I disengage the cutter, the belt comes off?     I fitted a new cutter belt and the cutter brake won't stop the cutter.     My drive chain keeps coming off and is stretching?     I may be over-tightening the drive chain, what is the correct adjustment?     The steering is stiff and the steering wheel comes loose all the time?     Can I hose my machine down with water to clean it?     What type of fuel and oil should I use in my mower?     Engine does not start (turn over) and there is a clicking sound from around the dash (steering console) area?     Engine does not start (turn over). The battery has been checked and there is no clicking sound?     How do I get the front and rear wheels off my mower?

©2002 Cox Industries. All rights reserved    |     Privacy & Legals    |     Contact    |     Admin