Back to Full Range

THE CRUISER ZERO TURN RIDE-ON RANGE

 

 

The Cox Cruiser zero turn ride on mower will turn on its own length, thanks to the twin hydro-gear transmissions. Just flick your control levers left or right and you’ll swing
around trees and garden beds in just one pass, with minimum effort. This zero turn mower features either a Briggs & Stratton Intek or Honda V-Twin engine, plus twin, 9 litre fuel
tanks means you can mow confidently, for hours on end.  The Cruiser comes with a fully fabricated 42″ (1055mm) or 48″ (1220mm)cutter deck, which has a 8mm reinforced skirt to
protect against impact damage. The bearing housings and pulleys are made out of cast iron to ensure longevity. The large turf saver tyres minimises ground impression on soft
and damp turf. When you have finished mowing, all you have to do is just snap on a standard hose fitting and the underside of your deck will be cleared of accumulated grass
clippings. You’ve also got the benefit of the slide adjustable high back seat complete with armrests for operator comfort.

View the Cruiser Zero Turn Range Brochure (PDF)

Cox Cruiser ZTR Specifications

Engine – V-Twin with Cast Iron Sleeve

CZP1642 CZP2342 CZP2348 CZP2242 CZP2442 CZP2448
HONDA GXV 530 OHV (16HP* – 11.9 kW)
HONDA GXV 630 OHV (23HP* – 17.1 kW)
Briggs & Stratton INTEK OHV (22HP* – 16.4kW)
Briggs & Stratton INTEK OHV (24HP* – 17.9kW)
Lubrication – Spin On Oil Filter, Pressure
Dual Element Air Cleaner – Unleaded Fuel – Fuel Capacity (twin tanks) total 18 litres

Mower

Honda

Briggs & Stratton

42″ (1055mm) Side Discharge Fabricated Deck, Twin Discs, Swing Back Blades
48″ (1220mm) Side Discharge Fabricated Deck, Three Discs, Swing Back Blades
Dual Hydro Gear EZT Hydrostatic Transmissions
Safety Switch – Seat, Cutter, Brake & Drive Levers
Front Tyres – 11X4.00 -5 – Rear Tyres – 18×9.50-8

Accessories

Mulching Kit suit 42″ cut – P/n CA161SQ
Mulching Kit suit 48″ cut – P/n CA127

Dimensions

42″ Model L 189cm x W 135cm Deflector Down
48″ Models L 189cm x W 150cm Deflector Down
Max weight 324kgs
* POWER = GROSS HORSEPOWER @3600RPM PER SAE J1940